Why Is My Rubber Plant Drooping

Why Is My Rubber Plant Drooping? 5 Causes & Solutions

If you’ve noticed that your rubber plant’s leaves have started to droop, you’re probably right to think that something is wrong.

If there are no other signs of trouble, it usually means you caught the problem early, and getting your rubber plant back to full health shouldn’t be too hard.

We’ve figured out why Rubber Plant leaves hang down, so everything you need to know is below:

Underwatering often causes drooping Rubber Plant leaves

Rubber plants, like all other houseplants, need water to grow. If you don’t give your plant enough water, it may have problems, like its leaves falling over.

Rubber plants don’t mind if you forget to water them once in a while, but if you do this for a long time, you may start to see problems.

You should let the potting mix dry out, but you shouldn’t go more than 7–10 days without watering while the plant is growing (and 2-3 weeks during winter).

 Why Is My Rubber Plant Drooping

How do I know if underwatering is the cause of the drooping leaves?

There are a few key signs you should look for to tell if your rubber plant’s leaves are drooping because it isn’t getting enough water.

Leaves are dry and crispy

If your Rubber Plant’s leaves are drooping and they are also very dry, crispy, or break easily when touched, your plant is probably drowning. If the problem isn’t fixed soon enough, the leaves may turn a light brown colour.

The potting mix is dry

Taking the plant out of its pot and looking at the potting mix is a simple way to figure out if the leaves that are drooping are because the plant is getting too little water.

Your plant needs more water if the soil feels dry, almost like dust, and doesn’t stick to your fingers, the roots, or the pot. If you don’t want to get your hands dirty, you can use a finger or chopstick to check the moisture level.

 Why Is My Rubber Plant Drooping

The soil is coming away from the sides of the pot

This is a great way to tell at a glance if your plant is getting too much water.

If the soil in your pot is getting hard and pulling away from the sides, you need to water it more. This could be why the leaves on your rubber plant are drooping.

See also  How to Propagate Pothos Plants - 6 Detail Guides

Your plant perks up again after watering

Do this only if you’ve checked the soil’s moisture level to make sure you’re not overwatering a plant.

This is probably what’s wrong if your plant seems to perk up a bit and the leaves look a little less droopy a few hours after you watered it. But if the disease is far enough along, you might not notice after just one watering.

Use a moisture meter

If you don’t want to make any more watering mistakes, you should definitely buy a moisture meter. Just put them in the soil, and they will tell you how much water is in the soil.

This way, you can be sure that your plants are getting enough water. They are great for anyone who wants to grow plants.

How do I fix an underwatered Rubber Plant?

Your first thought might be to put your rubber plant in water to stop its leaves from falling over. But if the environment around your rubber plant changes quickly, your plant may go into shock.

 Why Is My Rubber Plant Drooping

You should instead slowly start watering again, doing it twice a day for a week. This will slowly add water to the soil, and your plant should get back to full health.

Make a better plan for watering your plants in the future so you don’t overwater them and cause their leaves to droop.

If you want to avoid the problem altogether, you can buy a pot like this one that will water itself. We use them all the time because they make watering easy and give us peace of mind when we leave for a few hours.

Overwatering can also cause drooping Rubber Plant leaves

Like not giving your rubber plant enough water, giving it too much water can cause its leaves to droop, which is a much worse problem.

Soil that is too wet hurts the rubber plant’s root system and keeps it from getting the nutrients it needs. This will make your rubber plant’s leaves hang down, turn dark brown, get soft, and fall off.

Make sure the potting mix has dried out completely before you water it again. Rubber plants are succulents, which means they store water to help them survive in dry times. Because of this, too much water makes them too soft, floppy, and droopy.

How do I know if overwatering is the cause of the drooping leaves?

Many of the signs of too much water and too little water are different, so you just need to know what to look for.

Leaves are soft and mushy

If the leaves on your rubber plant get soft and mushy and hang down, it’s most likely because you’ve given it too much water. If the problem gets bad enough, the leaves may start to turn a dark brown or even black colour.

The potting mix is waterlogged

If the potting mix is wet and clumpy and the leaves of your rubber plant are falling over, you probably overwatered it.

The potting mix will smell

If you think you might be giving your plant too much water, we suggest getting close to it and smelling the soil. Soil that has been soaked in water smells musty and wet, which is hard to ignore.

See also  Philodendron Bipennifolium: Profile & 5 Full Guides

Use a moisture meter

You could also use a moisture meter to make sure the problem isn’t too much water. With these cheap, small tools, you can find out if the soil is dry or wet.

 Why Is My Rubber Plant Drooping

How do I fix an overwatered Rubber Plant?

If you suspect that overwatering is causing your Rubber Plant’s drooping leaves, you should act quickly to prevent further damage.Take your rubber plant out of its pot to check if the soil in it is wet.

Check the root system and get rid of any rotting or broken roots. If the potting mix has gotten wet, replace it with new, good-quality potting mix so your plant can start to get better.

Waiting for the soil to dry out on its own will hurt the roots and plant even more. Remove any leaves that are soft or mushy so that your plant can use its energy to grow in other ways.

From now on, don’t water your rubber plant again until the soil in the pot is completely dry. This will help stop the problem from happening again and keep your plant happy, healthy, and not sagging.

You could also use a container that waters itself to make sure your plant gets just the right amount of water.

They help keep your rubber plant from getting too little or too much water and are a good investment if you want to keep your drooping leaves from getting worse. also great for people who forget to water their plants or who travel a lot.

Drainage issues can also cause drooping leaves

Your Rubber Plant’s leaves might be drooping not because of how often you water it but because the soil and pot may not have enough drainage.

There are a few easy things you can do to fix your rubber plant’s drooping leaves and improve drainage.

Add perlite into the potting mix

By adding a small amount of perlite to the soil of your rubber plant, you can easily make it drain better. This will make it much easier for water to flow through and out of the drainage holes in your pots.

Perlite is a light, white material that helps water drain and also lets air into the soil, which gives your plants the oxygen they need.

There are great pre-mixed potting soils that use perlite, like this one, that save a lot of time and are very useful.

Ensure your pot has drainage holes

Your rubber plant’s pot must have holes for drainage so that any extra water can flow into the planter or saucer.

If there aren’t any holes for the water to drain through, it’s much easier to overwater, and your rubber plant will sit in wet soil.

 Why Is My Rubber Plant Drooping

Another simple step is to fill the bottoms of your pots with small stones or pebbles.This will keep dirt and other debris from getting stuck in the drainage holes.

Use clay/ terracotta pots

Clay or terracotta pots are more expensive and more likely to break, but they have benefits that go far beyond how they look. Since clay is porous, some of the water in your soil may leak out of the pot through the sides.

See also  How To Plant Pineapple - 7 Quick Steps

Most plastic pots don’t work this way. Instead, they keep all the water inside. So it’s sometimes worth spending a little more to make sure the roots of your rubber plant aren’t sitting in too much water. This can help keep the leaves from drooping.

Drooping leaves can indicate a lack of sunlight

Rubber plants usually have drooping leaves because they don’t get enough water, but not getting enough sun could also be a problem. To grow, rubber plants need a lot of bright light that comes from the side.

If you don’t give your plant enough water, you may start to see a number of problems with it. Drooping leaves are one of the first signs of trouble.You’ll notice discoloured leaves, slower growth, and your plant losing leaves as the problem worsens.

If you think that your rubber plant’s drooping leaves are because it doesn’t get enough sunlight, move it to a slightly brighter spot in your home. Keep it out of direct sunlight, especially during the summer, because the leaves could get burned.

A light meter could help you figure out if this is the problem, and if low light levels are to blame, an LED grow light like this one is a great way to boost healthy light levels!

Too many salts may cause drooping leaves

If none of the other causes of your Rubber Plant’s drooping leaves are to blame, too much salt may be. It happens less often than the other two, but it is still important to think about.

Salt problems can be caused by poor water quality from watering, but they are most often caused by giving your plant too much food or fertilizer.

Because the problem isn’t always obvious, it’s more difficult to tell if your Rubber Plant’s drooping leaves are caused by too much fertilizer, but you may notice white pieces on top of the potting mix.This could be because of a buildup of salt.

Only give your rubber plant food in the spring and summer, when it is growing. Feeding at a lower strength than what is recommended in the instructions is always best to lower the risk of burning.

Since every plant is different, we can’t expect that one size will fit all. How much fertilizer to use depends on how old your plant is, what time of year it is, and where it lives.

Stop feeding your rubber plant and wash or change the potting mix to prevent salt buildup that could be hurting the root system.

These are the most likely reasons why the leaves on your rubber plant have started to droop. Most of the time, this problem is caused by problems with watering, so we usually tell people to start there and work their way down the list.

If you caught the problem early enough, a simple fix should make your plant healthy again. If the disease has spread past the drooping leaves, you may need to cut your rubber plant into pieces and spread the healthy parts if you can’t save it.

See more articles in this category: Outdoor Plants

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *